Construction Chemicals

Product Details:

 Drop-in anchors/ Bullet Fastner  these are often used for overhead applications because the anchor's internal plug expands in four directions to hold the anchor firmly inside the hole before inserting a threaded rod or bolt.

Additional Information:

• Delivery Time: immediate
• Packaging Details: Box

Product Details:

Renderoc Plug is supplied as a ready to use blend of dry powders which requires only the site addition of clean water to produce a highly consistent, rapid setting mortar which is easy to apply in many difficult conditions. The material is based on a blend of cements, graded aggregates, special fillers and chemical additives which control the rate of set and minimise the risk of thermal cracking. Renderoc Plug provides an initial set time of approximately one minute.

Additional Information:

• Delivery Time: Immediate
• Packaging Details: 15kg

Product Details:

MCON STEEL 2K is anti-corrosive coating for structural steel andreinforcement. It is a rust treatment which stabilises steel reinforcementand creates moisture - repelling coating of good mechanical stability,abrasion resistance, bond strength and excellent anti-corrosive properties.MCON STEEL 2K has excellent bond with the steel with long term anticorrosive properties.

Additional Information:

• Delivery Time: Immediate
• Packaging Details: 2 kg. powder + 1 liter liquid

Product Details:

STARBOND AM-LG-40 is an Integral Liquid Waterproofing Admixture for concrete and cement mortar. It has good plasticizing properties, makes concrete cohesive and prevents segregation. The liquid is to be added to the wet concrete or mortar. The product conforms to IS: 2645 -1975 as an ‘Integral waterproofing admixture’. It fills up the capillaries in the concrete giving effective water proofing. It can also be used to accelerate the setting time of freshly mixed concrete.

Additional Information:

• Item Code: 38244090
• Delivery Time: Immediate
• Packaging Details: AM LG 40 is available in 1, 5, 10, 20 KG can & 50, 200 kg. Barrel.

Product Details:

Renderoc RG(L)  is supplied as a ready to use blend of drypowder, which requires only the site addition of clean water to produce  a  free-flowing, non-shrink microconcrete.    Thematerial is based on Portland cements, and fillers, and additives which impart controlled expansion characteristics in the plastic state, while minimising water demand. The low water requirement ensures high early strength and long term durability. For larger repairs, Renderoc RG(L) may be modified by the addition of 5mm to 12mm  clean, graded saturated surface dry aggregates at site. For exceptionally large  repairs, the local Fosroc office should be consulted.

Additional Information:

• Production Capacity: M 35 Grade
• Packaging Details: 25 kg Bag

Product Details:

Our company is involved in offering superior quality Industrial Construction Chemical. Offered chemicals are processed using finest quality chemical compounds, at our vendors manufacturing unit. These chemicals are highly acclaimed among the clients for their longer shelf life, accurate composition and environment friendly.

Product Details:

POLYALK WP is a most effective and proven

polymeric waterproofing solution

Additional Information:

• Delivery Time: Immediate
• Packaging Details: 20Kg

Product Details:

Modified styrene butadiene emulsion

Product Details:

Super plasticizing admixture based on selected sulphonated napthalene polymers

Product Details:

Product Details:

Crack sealing cementitious material in powder form

Additional Information:

• Delivery Time: immidiate
• Packaging Details: available in 1 kg and 25 kg

Product Details:

Latex acrylic polymer emulsion

Product Details:

Conplast SP430 G8 is based on  Sulphonated Napthalene Polymers and supplied as a brown liquid instantly dispersible in water. Conplast SP430 G8 has been specially formulated to give high water reductions upto 25% without loss of workability or to produce high quality concrete of reduced permeability.

Product Details:

Low viscosity epoxy resin with long potlife for crack injection

Product Details:

Uses:

• To produce pumpable concrete
• To produce high strength, high grade concrete by substantial reduction in water resulting in low permeability and high early strength.
• To produce high workability concrete requiring little or no vibration during placing.

Product Details:

Renderoc Plug Rapid Setting Plugging Mortar is supplied as a ready to use blend  of  dry powders which requires only the  addition of clean water atsite to produce a highly consistent, rapid setting mortar whichis easy to apply in many difficult conditions. The material is based on a blend of cements, graded aggregates, special fillers and chemical additives which control the rate of set and minimise the risk of thermal cracking.


Uses:
For the rapid temporary patching and plugging of concrete segments, concrete and brick tunnel linings, sewage systems, below ground access chambers, pipes, basements, foundations and mines.

Product Details:

Superplasticising slump retaining admixture

Uses:

• Conplast SP430 SRV is used where a high degree of workability is required and also as an aid to workability retention where delays in transportation or placing are likely or when high ambient temperatures cause rapid slump loss. To facilitate production of high quality concrete of improved durability and water tightness.

Product Details:

Fosroc Cebex 200 a plasticising and hydrogen free expansion grout admixture is supplied as a powder admixture. Cebex 200 allows the use of a reduced water/ cement ratio with consequent increased strengths and durability. The expansive medium counteracts the natural settlement and plastic shrinkage of the grout and aids stability and cohesion.

Uses:

• It is an admixture for cement grouts where a reduced water / cement ratio and positive expansion are required. 
• Applications include bed  grouting, duct grouting, non-shrink infi lling and jointing.

Product Details:

Owing to the expertise of our team of experienced professionals, we are able to manufacture and supply an exclusive range of Foscroc Lokfix P Polyester Resin.

Product Details:

Zycosil Max is a new generation reactive organosilane based water proofing agent that seals nanopores & nano - cracks. It is concentrated, highly penetrative & a strong water-repellent.

Product Details:

Styerenebutadiene co-polymer latex liquid