Joints and Sealants

Product Details:

Nitoseal PU40 is a one part, low modulus gun grade elastomeric sealant based on polyurethane technology. Nitoseal PU40 maybe applied to joints between 5 and 35mm wide. To minimisestress imposed on the joint sealant, all moving joints shouldbe designed to an optimum width to depth ratio of 2:1 with anoverriding minimum depth of 5mm for non-porous surfaces and 10mm for porous surfaces. For joint widths exceeding 35mm, please contact your localFosroc Technical Service Department.

Uses:Nitoseal PU40 is suitable for sealing joints in concrete, brickwork, blockwork, precast panels, stone cladding, perimeter sealing around doors and windows, and non trafficked floor joints.

Advantage:

• Adhesion to most common building materials
• Single component with fast rate of cure
• Easy to apply
• UV resistant
• Primerless for most applications (see “Priming”)
• Available in a range of colours
• ISO11600:2002 Type F 25LM compliant

Additional Information:

• Packaging Details: 12L

Product Details:

Nitoseal PU280 is available in a range of attractive colours with a separate colour pack providing visual mixing control. We are specialized in offering the superior quality assortment of Nitoseal PU 280 Silver Grey.

Product Details:

Uses
Sealing movement joints in building and civil engineering structures, including superstructures, floors, basements and subways.

Advantages

• Meets key international standards
• Forms a tough, elastic, rubber-like seal
• Accommodates continuous and pronounced cyclic movement
• Excellent adhesion to most common substrates, including primed concrete, glass, aluminium and stainless steel
• High resistance to ageing reduces physical damage due to climatic extremes

Additional Information:

• Packaging Details: 6.5 Kg

Product Details:

Colpor 200PF Joint Sealants is a two component cold applied pouring grade joint sealant for pavement joints. It is flow applied into the joint either directly from the can or using a sealant gun.

Colpor 200PF retains its movement accommodation of 25% on butt joints throughout the extremes of temperature, it does not harden in cold weather nor become excessively soft, or pick up in hot conditions.

Colpor 200PF is resistant to jet blast and is suitable for concrete runways and hard standings. Colpor 200PF is suitable for areas where fuel spillage is likely

Uses :-

• For the sealing and maintenance of joints in concrete roads, concrete runways and hard standings. Colpor 200PF is particularly suitable for sealing areas where fuel and oil spillage might occur such as aircraft hardstanding areas, oil terminals, garage forecourts, parking and cargo bays.

Advantage:

• High durability and long service life
• High movement accommodation 
• Cold applied — no heating equipment required
• Fuel, oil and hydraulic fluid resistance
• Jet blast resistant

Additional Information:

• Packaging Details: 3 ltr

Product Details:

Our firm is a very well-known name in distributing and supplying Joints and Sealants that are manufactured using high quality ingredients, at our vendors end. Offered joints and sealants are widely acclaimed for their high effectiveness and longer shelf life. Clients can avail these joints and sealants from us at competitive prices.

Features:

• Optimum packaging
• Water resistant
• Reduces maintenance cost

Fosroc possess unique strengths to support our promise:

• Over 50 years experience and dedication to the construction industry
• An extensive and comprehensive suite of products
• Products with integrity that are tried and true
• Expert application knowledge about what technology provides the best solution
• International exposure across more than 70 countries
• Flexibility to access the best materials from a variety of sources around the globe

We offer following types of Sealants:

• Fosroc Colpor 200 cold applied, two part polyurethane sealant is designed for joints in concrete paved areas.The capability of accommodating cyclic movements is retained by Colpor 200 throughout extremes of temperature conditions.
• Colpor 200 is resistant to fuel, oil and hydraulic fluid spillage, will not harden in cold weather nor become excessively soft or pick up in hot conditions.
• Colpor 200 has high durability and long service life which significantly reduces maintenance costs.
• Nitoseal 280 two-part pouring grade sealant is formulated from a blend of epoxy and urethane polymers. The mixed sealant is self levelling and can be poured directly into horizontal joints to form a tough resilient seal possessing a limited degree of flexibility.
• Nitoseal 280 is available in a range of attractive colours with a separate colour pack providing visual mixing control.
• Nitoseal MS50 is a one part, medium modulus sealant based on hybrid silyl modified polyether technology.
• Nitoseal MS60 is a one part, low modulus sealant based on hybrid silyl modified polyether (“MS”) technology.
• Nitoseal MS600 is a one part medium modulus sealant based on hybrid silyl modified polyether technology. It has a fast rate of cure and forms a tough, highly durable and water resistant elastomer.
• Conforms to the DWI Water Quality Regulations 25(1)(b) for products having a small surface area in contact with water for public supply.

Product Details:

Uses:-

• Integral sealing for construction joints in concrete cast where conventional waterstops are impractical to use because of limited access.
• Convenient and problem solving in situations where a conventional waterstop would require complex shuttering.
• Typical uses include secant piled and diaphragm walled basements, pile caps and casting against old concrete.
• Supercast SW20 Joint Sealant can provide simple solutions to detailing pipe entries, construction joints in the vertical plane and to kicker joints.
• Can be linked to Supercast PVC*† waterstops to give an effective combination of waterstops which maintain network continuity

Additional Information:

• Packaging Details: 5 MTR

Product Details:

Nitoseal PU280 two-part pouring grade sealant is formulatedfrom a blend of epoxy and urethane polymers. The mixedsealant is self levelling and can be poured directly into horizontal joints to form a tough resilient seal possessing a limiteddegree of fl exibility. Nitoseal PU280 is available in a range ofattractive colours with a separate colour pack providing visualmixing control.

Uses:
For sealing internal floor joints subject to heavy industrial use in factories, food processing areas, warehouses and maintenance facilities. Particularly suitable for sawn joints in long strip flooring and other large internal areas.

Advantages:

• Load bearing for support of arises under heavy wheel load.
• Good resistance to chemicals and hydrocarbon fuels.
• Excellent adhesion without primer to dry clean concrete.
• Pouring grade ensures ease of placing.
• Suitable for use in wide joints.
• Self levelling to produce uniform and neat joints.